Washing Machine For New Clothes And Bed Linen, dirt that is missing from your clothes, towels and sheets must go somewhere, which means that over time dirt can accumulate inside your washing machine.
without regular cleaning, detergent residues, hard water deposits and mold around the lid may also remain on the device. This can leave a residue on the laundry or cause things to come out of the laundry with an unpleasant smell.
to make sure that your freshly laundered clothes and bed linen are as clean as possible, follow these steps to clean the washing machine once a month. These instructions are applicable for cleaning washing machines with both front and top loading, but there are some special requirements for both types.
Washing Machine For New Clothes And Bed Linen
How to clean the washing machine
if your washing machine is equipped with a self-cleaning function, select this cycle and follow the manufacturer’s instructions to clean the inside of the machine.
otherwise, you can use this simple three-step process to remove deposits on the hoses and tubes of the washing machine and ensure that your clothes stay fresh and clean.
Step 1: Start the heat cycle with vinegar
start an empty and normal cycle on fire using two glasses of white vinegar instead of detergent. Add vinegar to the detergent dispenser.
(don’t worry about damaging your car, as white vinegar won’t damage clothes. A) the combination of vinegar with hot water eliminates and prevents the growth of bacteria. Vinegar can also act as a flavoring agent and eliminate the smell of mold.
Step 2: Clean the washing machine from inside and outside
in the nearest bucket or sink, mix about 1/4 cup vinegar with a liter of warm water. Use this mixture, as well as a special sponge and toothbrush to clean the inside of the machine.
pay special attention to the dispenser for fabric softener or soap, the inside of the door and around the doorway. If your soap dispenser is removable, moisten it in vinegar water before cleaning. Also wipe the outside of the machine.
Step 3: Start the second heat cycle
run another empty normal cycle at high temperature, without detergent or vinegar. If desired, add 1/2 cup of baking soda to the drum to remove all deposits formed after the first cycle. At the end of the cycle, wipe the inner surface of the drum with a microfiber cloth to remove residues.
How to clean a top-loading washing machine
use these tips to clean the top-loading washing machine in hard-to-reach places.
Step 1: Pause and absorb
to clean the top-loading washing machine, it is recommended to suspend the machine during the first hot water supply cycle described above. Let the bath fill up and stir for about a minute, then pause in the cycle for an hour so that the vinegar is absorbed.
Step 2: Clear hard-to-reach places
use a toothbrush to clean hard-to-reach areas around the lid and under the edge of the tub.
Step 3: Wipe off the dust and clean the outer surface
top-loading sinks also tend to collect more dust than front-end loaders. To remove splashes of dust or detergent, wipe the top of the device and the dial with a microfiber cloth soaked in white vinegar.
How to clean a front-loading washing machine
when it comes to cleaning a front-loading washing machine, a gasket or rubber seal around the door is usually the cause of a moldy smell.- smelling underwear.
moisture and detergent residues can create a breeding ground for mold and mildew, so it is important to clean these areas regularly.
Step 1: Clean the gasket
to remove dirt, spray the area around the door with distilled white vinegar and leave the door open for at least a minute before wiping it with a clean microfiber cloth.
Step 2: Preventing mold formation
for deeper cleaning, you can also wipe the area with a diluted bleach solution. To prevent mold growth, leave the door open for a few hours after each wash to allow the moisture to dry.